AR-M160 SHARP SCANNER DRIVER DETAILS:
|File Size:||21.1 MB|
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP|
|Price:||Free* (*Free Registration Required)|
AR-M160 SHARP SCANNER DRIVER
In addition to scanning paper-based documents, the. Up to six pre-registered applications are.
SHARP AR M/ SERVICE MANUAL Image Scanner Exposure (Photography)
When you close the scanner driver after scanning, the image data will appear as a new file in Sharpdesk, as shown below. For details on the scan settings, click the "Help" button in the preview screen to display Help. Selections are "Platen" document "Scanning Position" menu. Previews the document. For details on the settings, ar-m160 sharp scanner the "Help" button in the preview screen to display Help.
To return to the regular view, remove the checkmark. Before clicking the "Scan" button, make sure the settings are correct. This allows the orientation to be ar-m160 sharp scanner without resetting the original.
SHARP AR M160/ 205 SERVICE MANUAL
Upon scanning, the image file is created in the orientation shown in the preview window. Pixels, mm, or inches can be selected for the units of the numbers.
By initially specifying a scanning area, numbers can be entered to change that area relative to the top left corner as a fixed origin. Fusing section No. Thermistor Installation: When installing the thermistor, be sure to face the installing projection A toward the installing surface. Check that the thermistor is in contact ar-m160 sharp scanner the upper ar-m160 sharp scanner roller. Assembly: Put the fusing harness A on the heater lamp B as shown in the figure and fix them together.
Upper heat roller Disassembly: There are three pawls on the fusing cover. Remove the ar-m160 sharp scanner and slide the fusing cover to the right to remove. The heater lamp is fixed on the fusing cover with a screw.
Slide the fusing cover to the front and remove the screw, then remove the heater lamp. Lower heat roller Assembly: When installing the paper guide 3 before fusing, fix the paper guide fixing plate with screws temporarily so that the paper ar-m160 sharp scanner fixing plate 2 is in contact with the frame bottom under fusing A.
Set the paper guide 3 ar-m160 sharp scanner fusing to the bottom line of the positioning reference Band tighten the screw firmly. Paper exit section No. Paper exit roller Assembly: Insert the spring pin so that the waveform A of the spring pin faces in the longitudinal direction of the paper exit drive gear long hole B. Optical frame unit Installation: Install the optical unit in the sequence shown above. Note: When replacing the LSU, be careful not to touch the dust-shield glass. Adjustment: Image lead edge position adjustment Image left edge position adjustment Paper off-center adjustment Size of the screwdriver for removing the LSU.
Drive unit Assembly: Move down the clutch pawl as shown below, and avoid the clutch and install. Ar-m160 sharp scanner multi paper feed section No. Manual paper feed clutch Note: Push the lever at the right edge of the multi frame cover to the right upper side and remove it.
Sharp ARM160 Toner Cartridges
Power section No. Power P. Power switch Content. Others No. Tray interface P.SHARP AR-M free download. OS Support Windows Downloads Total: 16, Last week: 71 Ranking #7 in Scanners Publisher Sharp. •Scanning from ar-m160 sharp scanner operation panel of the machine.
•Resolving printer and scanner problems. •Specifications. ○ Where "AR-XXXX" appears in this manual.